Configuring Network Security; Printing A Test Page - Avery Dennison Monarch 9460 SNP System Administrator Manual

C o n f i g u r i n g N e t w o r k S e c u r i t y
You can enable or disable network security, assign WEP keys, set up a User ID and
password, select an authentication protocol, and more. See "Basic Security
Configurations" for more information.
From the side menu, click Admin. The Web Admin Configuration screen appears.
1.
Click Configure Network Security.
2.
Assign the necessary security settings for your network. See "Basic Security
3.
Configurations" for more information.
Click Submit.
4.
Click the reset link at the bottom of the screen. The Reset Server screen appears.
5.
Click Submit and wait five seconds for the print server to reset.
6.
Even though you submitted your changes, they do not take effect until you reset the
print server.
You must re-enter your access password to make any further changes to the printer
settings.
P r i n t i n g a T e s t P a g e
You can use the Web browser to send a test page to the printer.
From the side menu, click Admin. The Web Admin Configuration screen appears.
1.
Click Print Test Page.
2.
Three wireless network information labels print. See Chapter 2, "Configuring the
3.
802.11b/g and IP Settings" for more information on test labels.
Using a Web Browser 4-13