Ipmi Submenu - Fujitsu primergy TX150 User Manual

Chapter 8 Configuring Hardware and Utilities
Item
Power Failure Recovery

8.2.10 IPMI Submenu

Use this submenu to configure server management settings.
Main Advanced
SEL Load
Clear System Event Log
Event Log Full Mode
BMC Time Sync
System Event Log
SDRR Browser
LAN Setting
F1 Help
Exit
Esc
Item
SEL Load
Clear System Event Log
Event Log Full Mode
BMC Time Sync
System Event Log
SDRR Browser
230
table: Items on the Power On/Off Submenu
Setting
• Always On
• Always Off
• Previous State (Initial
value)
Security Server
IPMI
xx%
[Disabled]
[Overwrite]
[Enabled]
-/+ Change Values
Select Item
Select Menu Enter Select
table: Items on the IPMI Submenu
Setting
Displays the usage of event log space as a percentage.
• Disabled
(Initial value)
• Enabled
• Overwrite
(Initial value)
• Maintain
Enabled (Unchangeable)
Displays the system event logs. Press the [Enter] key to display the system event
log window. Display previous and subsequent entries using [+] [-] keys.
Displays sensor information. The SDRR Browser is displayed by pressing [Enter].
Description
Sets whether to turn the power on or off after a
temporary main power outage due to power
interruption, etc.
Note:
For UPS scheduled operation, set to
[Always On]. Otherwise, the power may
not be turned on at the specified time.
Exit
Item Specific Help
F9 Mod. Defaults
Sub-Menu F7 Previous Values
Description
Sets whether or not to clear the event log.
Sets whether or not to overwrite the event log when
space available for it becomes full.
Note:
Changing this setting deletes the existing
event log. Before making changes, refer to
"9.3.1 How to Use Server Management Tools"
( pg.272) for saving the event log.
Synchronizes the internal clock of the Baseboard
Management Controller (BMC) with the system
time.