Ipmi Submenu - Fujitsu Primergy RX100 S3 User Manual

Chapter 8 Configuring Hardware and Utilities
Item
Power-Off Source
Software
Power Button
Power Failure Recovery

8.1.10 IPMI Submenu

This submenu appears when selecting "IPMI" from the advanced menu.
Use this submenu to configure server management settings.
Main Advanced
SEL Load
Clear System Event Log
Event Log Full Mode
BMC Time Sync
System Event Log
SDRR Browser
LAN Setting
F1 Help
Exit
Esc
Item
SEL Load
Clear System Event Log
214
table: Items on the Power On/Off Submenu
Setting
• Disabled
• Enabled (Initial value)
• Disabled
• Enabled (Initial value)
• Always On
• Always Off
• Previous State
(Initial value)
Security Server
IPMI
xx%
[Disabled]
[Overwrite]
[Enabled]
-/+ Change Values
Select Item
Select Menu Enter Select
table: Items on the IPMI Submenu
Setting
Displays the usage of event log space as a percentage.
• Disabled
(Initial value)
• Enabled
Description
Sets whether or not to enable the power to be
turned off using a program or the operating
system.
Sets whether or not to allow the use of the
power switch for turning the power off, when
the ACPI function is disabled.
Sets whether to turn the power on or off after
a temporary main power outage due to power
interruption, etc.
Note:
For UPS scheduled operation, set to
[Always On]. Otherwise, the power
may not be turned on at the specified
time.
Exit
Item Specific Help
Configure serial port
using options:
[Disabled]
No configuration
[Enabled]
User configuration
[Auto]
BIOS or OS chooses
configuration
Setup Defaults
F9
Sub-Menu F7 Previous Values
Description
Sets whether or not to clear the event log.