Ipmi Submenu - Fujitsu PRIMERGY RX200 S2 User Manual

Chapter 8 Hardware Configuration/Utilities

8.2.12 IPMI Submenu

Appears when [IPMI] is selected from the [Server] menu.
Configures the Baseboard Management Controller (BMC).
IPMI Specification Version
BMC Firmware
Clear System Event Log
Event Log Full Mode
Existing Event Log number
Remaining Event Log number
System Event Log
System Event Log (list mode)
Real-time Sensor Data
F1 Info
Esc Exit
Item
IPMI Specification Version
BMC Firmware
Clear System Event Log
Event Log Full Mode
Existing Event Log number
Remaining Event Log
number
System Event Log
System Event Log
(list mode)
Real-time Sensor Data
226
PhoenixBIOS Setup Utility
IPMI
n.n
n.nn.nnnnnnnn
[Disabled]
[Overwrite]
nnn
nnn
-/+ Change Values
Select Item
Select Menu Enter Select
table: Items on the IPMI Submenu
Setting
-
-
• Disabled (at the time of
purchase)
• Enabled
• Overwrite (at the time of
purchase)
• Maintain
-
-
[Enter]
[Enter]
[Enter]
Server
Item Specific Help
Setup Defaults
F9
Save and Exit
Sub-Menu F10
Description
Displays the IPMI Specification version.
Displays the BMC Firmware version.
Deletes the logs stored in the system event log.
Set the operation to be performed when the system
event log becomes full.
• Overwrite: Logs are overwritten in old to new
order.
• Maintain: Existing logs are maintained. No new
logs are recorded.
Note:
Before changing the setting for this item, be
sure to use [Clear System Event Log] to
delete the system event log.
Displays the number of recorded logs.
Displays the number of logs that can be recorded.
Displays the contents of the system event log.
For details on contents, refer to "9.3 System Event
Log" ( pg.267).
Lists the contents of the system event log.
For details on contents, refer to "9.3 System Event
Log" ( pg.267).
Displays temperature and voltage sensor data.