How To Operate Numeric Lcp (Nlcp) - Danfoss FC 100 Series Operating Instructions Manual

How to Operate the Frequenc...

6.1.3 How to Operate Numeric LCP (NLCP)

The following instructions are valid for the NLCP (LCP 101).
The control panel is divided into four functional groups:
1. Numeric display.
2. Menu key and indicator lights (LEDs) - changing
parameters and switching between display
functions.
3. Navigation keys and indicator lights (LEDs).
4. Operation keys and indicator lights (LEDs).
NOTE
Parameter copy is not possible with Numeric Local
6 6
Control Panel (LCP101).
Select one of the following modes:
Status Mode: Displays the status of the frequency converter or
the motor.
If an alarm occurs, the NLCP automatically switches to status
mode.
A number of alarms can be displayed.
Quick Setup or Main Menu Mode: Display parameters and
parameter settings.
58
®
VLT HVAC Drive Operating Instructions
Indicator lights (LEDs):
•
•
•
®
MG.11.AD.02 - VLT is a registered Danfoss trademark
Illustration 6.1: Numerical LCP (NLCP)
Illustration 6.2: Status display example
Illustration 6.3: Alarm display example
Green LED/On: Indicates if control section is on.
Yellow LED/Wrn.: Indicates a warning.
Flashing red LED/Alarm: Indicates an alarm.