Mechanical Installation; Before Starting - Danfoss FC 100 Series Operating Instructions Manual

Mechanical Installation

3 Mechanical Installation

3.1 Before Starting

3 3
3.1.1 Checklist
When unpacking the frequency converter, ensure that the unit is undamaged and complete. Use the following table to identify
the packaging:
Enclosure
type:
Unit size (kW):
200-240 V
380-480 V
525-600 V
Table 3.1: Unpacking table
Please note that a selection of screwdrivers (phillips or cross-thread screwdriver and torx), a side-cutter, drill and knife is also
recommended to have handy for unpacking and mounting the frequency converter. The packaging for these enclosures
contains, as shown: Accessories bag(s), documentation and the unit. Depending on options fitted there may be one or two bags
and one or more booklets.
14
VLT
A2 A3
(IP 20-21) (IP 20-21) (IP 55-66)
1.1-2.2 3.0-3.7
1.1-4.0 5.5-7.5
1.1-7.5
MG.11.AD.02 - VLT
®
HVAC Drive Operating Instructions
B1/B3
A4 A5
(IP 55-66)
20-21-55-66)
5.5-11/
1.1-2.2 1.1-3.7
5.5-11
11-18.5/
1.1-4.0 1.1-7.5
11-18.5
11-18.5/
1.1-7.5
11-18.5
®
is a registered Danfoss trademark
B2/B4 C1/C3
(IP (IP (IP
20-21-55-66) 20-21-55-66)
15/ 18.5-30/
15-18.5 22-30
22-30/ 37-55/
22-37 45-55
22-30/ 37-55/
22-37 45-55
C2*/C4
(IP
20-21-55-66)
37-45/
37-45
75-90/
75-90
75-90/
75-90