Figure 10–1
10.1.2
Replacing the CPU Module
Caution -
an antistatic wrist strap and use an ESD-protected mat. Store ESD-sensitive
components in antistatic bags before placing them on any surface.
1. Replace the CPU module as follows (Figure 10–1):
a. On the antistatic mat, hold the CPU module in an upright position with the
b. Move the levers on the CPU module to the 135-degree position.
Removing and Replacing the CPU Module
Use proper ESD grounding techniques when handling components. Wear
plastic surface facing you.
Motherboard and Component Replacement
10-3