Sun Microsystems Sun Ultra 60 Service Manual page 116

Caution -
an antistatic wrist strap and use an ESD-protected mat. Store ESD-sensitive
components in antistatic bags before placing them on any surface.
3. Attach the wrist strap.
See Section 7.2 "Attaching the Wrist Strap" on page 7-3.
4. Remove the hard drive as follows (Figure 9–1):
a. Push the handle latch to open the hard drive handle.
b. Extend the hard drive handle to disconnect the hard drive from the system
c. Holding the drive handle, remove the hard drive from the drive bay.
5. Place the hard drive on an antistatic mat.
Sun Ultra 60 Service Manual ♦ March 1999, Revision A
9-2
Use proper ESD grounding techniques when handling components. Wear
unit.