Sun Microsystems Sun Ultra 60 Service Manual page 119

Caution -
Use proper ESD grounding techniques when handling components. Wear
an antistatic wrist strap and use an ESD-protected mat. Store ESD-sensitive
components in antistatic bags before placing them on any surface.
3. Attach the wrist strap.
See Section 7.2 "Attaching the Wrist Strap" on page 7-3.
4. Remove the RMA as follows (Figure 9–2):
a. Remove the front bezel.
b. Using a number 2 Phillips-head screwdriver, loosen the captive screws
securing the RMA to the chassis.
c. Partially remove the RMA from the chassis.
d. Disconnect the peripheral cables and the power cables from the drives (not
illustrated).
e. Remove the RMA from the chassis.
5. Place the RMA on an antistatic mat.
9-5
Storage Devices