Sun Microsystems Sun Ultra 60 Service Manual page 27

Figure 3–1 Setting Up a TIP Connection
2. At the other Sun workstation, check the /etc/remote file by changing to the
/etc directory and then editing the remote file:
hardwire:/ dv=/dev/term/b:br#9600:el=^C^S^Q^U^D:ie=%$:oe=^D:
Note - The example shows connection to serial port B.
3. To use serial port A:
a. Copy and paste the serial port B remote file.
b. Modify the serial port B remote file as follows:
hardwire:\ dv=/dev/term/a:br#9600:el=^C^S^Q^U^D:ie=%$:oe=^D:
4. In a shell window on the Sun workstation, type tip hardwire.
hostname%tip hardwire
connected
Note - The shell window is now a tip window directed to the serial port of the
system unit being tested. When power is applied to the system unit being tested,
POST messages will be displayed in this window.
3-3
Power-On Self-Test