Replacing The Shroud Assembly - Sun Microsystems Sun Ultra 60 Service Manual

Figure 8–11
8.10.2

Replacing the Shroud Assembly

Caution -
an antistatic wrist strap and use an ESD-protected mat. Store ESD-sensitive
components in antistatic bags before placing them on any surface.
1. Position the shroud assembly onto the motherboard.
2. Connect the shroud assembly as follows (Figure 8–11):
Sun Ultra 60 Service Manual ♦ March 1999, Revision A
8-28
Removing and Replacing the Shroud Assembly
Use proper ESD grounding techniques when handling components. Wear