4. Attach the wrist strap.
See Section 7.2 "Attaching the Wrist Strap" on page 7-3.
5. Remove the PCI card as follows (Figure 10–3):
a. Using a Phillips-head screwdriver, remove the screw securing the PCI card
Caution -
side of the board.
b. At the two upper corners of the PCI card, pull the card straight up from the
c. Remove the PCI card.
6. Place the PCI card on an antistatic mat.
Sun Ultra 60 Service Manual ♦ March 1999, Revision A
10-8
bracket tab to the system unit chassis (not illustrated).
Avoid damaging the connector by not applying force to one end or one
slot.