Safety And Tool Requirements; Safety Requirements - Sun Microsystems Sun Ultra 60 Service Manual

5
CHAPTER

Safety and Tool Requirements

This chapter describes the safety requirements, symbols, safety precautions, and tools
required.
This chapter contains the following topics:
4 Section 5.1 "Safety Requirements" on page 5-1
4 Section 5.2 "Symbols" on page 5-2
4 Section 5.3 "Safety Precautions" on page 5-2
4 Section 5.4 "Tools Required" on page 5-3
5.1

Safety Requirements

For protection, observe the following safety precautions when setting up the
equipment:
4 Follow all cautions, warnings, and instructions marked on the equipment.
4 Ensure that the voltages and frequency rating of the power receptacle match the
electrical rating label on the equipment.
4 Never push objects of any kind through openings in the equipment. They may
touch dangerous voltage points or short components resulting in fire or electric
shock.
4 Refer servicing of equipment to qualified personnel.
5-1