c. Connect the DC switch assembly DC power connector to motherboard
d. Position the DC switch assembly into the chassis housing and snap it into
2. Replace the SCSI drive bay.
See Section 8.3.2 "Replacing the SCSI Drive Bay" on page 8-9
3. Replace the PCI fan assembly.
See Section 8.2.2 "Replacing the PCI Fan Assembly" on page 8-6
4. Position the front panel. Using a number 2 Phillips-head screwdriver, replace
the four screws securing the front panel to the chassis.
Sun Ultra 60 Service Manual ♦ March 1999, Revision A
8-22
connector J3504.
place.