3. Attach a wrist strap.
See Section 7.2, "Attaching the Wrist Strap" on page 7-3.
4. Remove the CPU module as follows (
a. Using the thumbs of both hands, simultaneously lift the two levers on the CPU
module upward and to the side to approximately 135 degrees.
b. Lift the CPU module upward until it clears the system unit chassis.
5. Place the CPU module on an antistatic mat.
Lever (2)
Removing and Replacing the CPU Module
FIGURE 10-1
):
FIGURE 10-1
CPU module
Chapter 10 Motherboard and Component Replacement
10-3