Connecting Polycom Microphones To Set-Top Or Component Systems - Polycom VSX 3000 Administrator's Manual

Administrator's Guide for the VSX Series

Connecting Polycom Microphones to Set-Top or Component Systems

2 - 18
The microphone and the SoundStation VTX 1000 both pick up sound from the
sides.
For best audio, place the microphone or SoundStation VTX 1000:
• On a hard, flat surface (table, wall, or ceiling) away from obstructions, so
the sound will be directed into the microphone elements properly.
• Near the people closest to the monitor.
• In large conference rooms, you may need more than one microphone. If
you are using a SoundStation VTX 1000, you may need to connect its
microphones.
Do not move the microphone or speak into it from above during calls.
To pick up audio from your site, you must connect a microphone or a
SoundStation VTX 1000 conference phone to the system. Refer to your
system's setup sheet for connection details.
Do not connect a SoundStation VTX 1000 to the system if you have already
connected a Polycom microphone.
You may place the microphones on the table, or you may mount them to the
ceiling. A ceiling mount kit is available for Polycom microphones.
You can connect two additional Polycom microphones to a VSX 7000,
VSX 7000s, or component VSX system.