Connecting Polycom Microphones To Set-Top Or Component Systems - Polycom VSX Series Administrator's Manual

Administrator's Guide for the VSX Series

Connecting Polycom Microphones to Set-Top or Component Systems

4 - 2
The microphone picks up sound from the sides.
For best audio, place the microphone:
• On a hard, flat surface (table, wall, or ceiling) away from obstructions, so
the sound will be directed into the microphone elements properly.
Near the people closest to the monitor.
•
In large conference rooms, you may need more than one microphone.
•
To pick up audio from your site, you must connect a microphone to the
system. Refer to your system's setup sheet for connection details.
You may place the microphones on the table, or you may mount them to the
ceiling. A ceiling mount kit is available for Polycom microphones.
You can connect two additional Polycom microphones to a VSX 7000s or
component VSX system.