Polycom VSX 3000 Administrator's Manual page 102

Administrator's Guide for the VSX Series
4 - 20
Setting
VCR/DVD Out Level
VCR/DVD Audio
Out Always On
7. Select and enter speaker settings:
Setting
Master Audio
Volume
Midrange Speaker
VSX 6000
VSX 7000
VSX 7000s
Subwoofer Speaker
VSX 7000
VSX 7000s
Subwoofer Level
VSX 7000
VSX 7000s
Bass
Treble
Line Outputs
VSX 6000
VSX 7000
Description
Sets the volume at which the call is recorded.
Allows you to record a call using one VCR or DVD, while
playing recorded content into the call from a second VCR
or DVD.
Do not select this setting if you have only one VCR or DVD
player connected. If this setting is disabled, the VCR audio
output is disabled when VCR is the selected camera
source.
Description
Sets the volume level for audio from the far site.
Specifies whether to use the system's built-in midrange
speaker.
You may prefer to turn off the midrange speaker if you
connect the audio output to Monitor 1 or if you connect an
external speaker system.
Specifies whether to use the system's subwoofer.
You may prefer to turn off the subwoofer speaker if you
connect the audio output to Monitor 1. The system will not
operate if you disconnect the subwoofer.
Sets the volume level for the subwoofer without changing
the master audio volume.
Sets the volume level for the lower frequencies without
changing the master audio volume.
Sets the volume level for the higher frequencies without
changing the master audio volume.
Specifies how the audio output behaves. The default
selection, Monitor - Far Site Audio, supplies audio to the
Monitor 1 audio outputs only when the system is receiving
audio from the far site.
If you have connected a VCR to record the conference,
select VCR - Far and Near Audio to supply audio from
both the far site and the system's microphones to the
VCR.