Polycom VSX 3000 Administrator's Manual page 95

Setting Description
Send Content Specifies whether to send content automatically when the PC
When PC is connected to the Visual Concert VSX or ImageShare II.
Connects
If this option is not selected, the presenter must press the
Play button on the Visual Concert VSX or ImageShare II to
send content to the far sites.
3. Select if you need to adjust the VGA Input settings for systems that
have built-in VGA capture capability or that use a Visual Concert VSX for
VGA capture.
Select Horizontal Position, Vertical Position, or Phase.
a
Press the navigation buttons on the remote control to adjust the
b
setting.
Press the
c
4. Go to System > Admin Settings > Monitors > Monitors.
5. Select and select where to display Content.
6. Go to System > Admin Settings > Network > Call Preference.
7. Configure this setting:
Settings Description
Enable H.239 Enables H.239 People+Content. Select this option if you
know that H.239 is supported by the far sites you will call.
Note: If callers experience issues when sharing content,
deselect Enable H.239.
8. VSX 7000e and VSX 8000—Go to System > Admin Settings > Audio >
Audio Settings.
9. Select two times and configure this setting:
Settings Description
Line Input Set Line Input to Visual Concert to share audio content.
Back button on the remote control to accept the setting.
Customizing the VSX System
4 - 13