Configuring Microphones Connected To Audio Inputs; Vsx 8000 - Polycom VSX 3000 Administrator's Manual

Configuring Microphones Connected to Audio Inputs

The Audio screen, where you choose Audio Settings or Stereo Settings, is
present only if stereo is enabled.
To configure VSX systems to use a Polycom Vortex mixer:
Go to this screen:
Audio Input
System > Admin Settings > Audio >
Audio Settings
Audio Input
System > Admin Settings > Audio >
Audio Settings > Next

VSX 8000

Audio Input
System > Admin Settings > Audio >
Audio Settings > Next
VSX 5000
VSX 7000
VSX 7000e
Serial Ports
System > Admin Settings > General
Settings > Serial Ports
Refer to the Polycom Vortex documentation for details on configuring the
mixer.
In addition to the Polycom microphone or SoundStation VTX 1000 conference
phone, you can connect other powered microphones directly to the system's
audio inputs.
Customizing the VSX System
Configure these settings:
Disable the Enable Polycom
Microphones setting if you have
integrated both a Vortex and a
SoundStation VTX 1000 conference
phone with the VSX system.
Configure Balanced In:
Set Input type to Line Input.
Disable Echo Canceller.
Configure Audio I/O:
Set Line Input to Audio Mixer.
Disable Echo Canceller.
Set RS-232 Mode to Vortex Mixer for
the appropriate port.
4 - 23