Polycom VSX 3000 Administrator's Manual page 97

To configure VCR/DVD video settings for recording a call:
Go to this screen:
Monitors
System > Admin Settings > Monitors >
Monitors
Monitors
System > Admin Settings > Monitors >
Monitors > Next
The VSX systems cannot be configured to simultaneously record content and show
it on the VGA output of a VSX 7000e, VSX 8000, or attached Visual Concert VSX.
To configure VCR/DVD audio settings for recording a call:
Go to this screen:
Audio Levels
VSX 6000, VSX 7000
System > Admin Settings > Audio >
Audio Settings > Next > Next
VCR/DVD
VSX 7000s, VSX 7000e, VSX 8000
System > Admin Settings > Audio >
Audio Settings > Next > Next
Customizing the VSX System
Configure these settings:
Choose a setting for Monitor 2.
When Monitor 2 is set to Off, you can
specify which video sources to record.
When Monitor 2 is enabled, the VCR or
DVD player records what is shown on
Monitor 1.
Select one or more sources for the VCR
Record Source.
If you select both near and far, the VSX
system automatically switches
recording to the site that is talking. If
you select content as a record source, it
is recorded (when available) regardless
of who is talking.
Configure these settings:
Set Line Outputs to VCR - Far and
Near Audio.
Adjust the VCR/DVD Out Level if
necessary.
Enable VCR/DVD Audio Out Always
On unless you have the VCR/DVD
inputs and outputs both connected to
the same device to play and record.
4 - 15