Managing The System Remotely; Using Vsx Web; Accessing Vsx Web - Polycom VSX 3000 Administrator's Manual

Managing the System Remotely

Using VSX Web

Accessing VSX Web

You configure, manage, and monitor the system from a remote computer
using the system's web interface, VSX Web. You can also use the Polycom
Global Management System, SNMP, or the API commands.
Your choice of management tool depends on your network environment:
• VSX Web requires only a web browser to control the system.
• Polycom Global Management System requires the Global Management
System application to be installed on your network.
• SNMP requires network management software on your network
management station.
• For more information about the API commands, refer to the Integrator's
Reference Manual for the VSX Series.
You can use VSX Web to perform most of the calling and configuration tasks
you can perform on the local system.
To configure your browser to use VSX Web:
1. Be sure that you use Microsoft Internet Explorer 6.0 or later as your web
browser.
2. Configure these settings:
— Allow cookies: Enabled
— Force pages to reload on every visit to a page: Enabled
5
5 - 1