Configuring Telephony - Polycom VSX 3000 Administrator's Manual

Administrator's Guide for the VSX Series

Configuring Telephony

3 - 22
You can use a SoundStation VTX 1000 conference phone with set-top and
component systems to place, add, or redial video calls, or to add video to audio
calls. To take advantage of the latest integration features, the VSX system
requires version 7.5 or later software and the SoundStation VTX 1000 requires
version 1.5 or later software.
You can connect an analog phone line to the VSX 7000e or VSX 8000 to make
regular telephone calls with the system or to add audio-only participants to
video calls.
To configure telephony options:
1. Go to System > Admin Settings > Network > Telephony.
2. Configure these settings:
Setting
Room Telephone
Number
System Telephone
Number
VSX 7000e
VSX 8000
VTX Telephone
Number
VSX 5000
VSX 6000
VSX 7000
VSX 7000s
VSX 7000e
VSX 8000
Outside Line
Dialing Prefix
Description
Enter the telephone number of the room where the system
is located.
Specifies the analog phone number of the system, including
country and area codes for the system's location.
Specifies the number of the SoundStation VTX 1000
conference phone that is connected to the system.
Specifies the dialing prefix used to call outside the network.