Polycom VSX 3000 Administrator's Manual page 168

Administrator's Guide for the VSX Series
Symptom
Cannot access the system
remotely.
(Continued)
Cannot manage the system
remotely.
7 - 12
Problem
DHCP Client is ON and no
DHCP server is available.
There is a firewall between
your computer and your
system.
Your computer is on a
different subnet and there
is a router between you and
your system.
You have not entered the
correct password.
Too many managers are
logged into the system.
Corrective action
Contact your network administrator.
Contact your network administrator.
Place your computer and system on the same
subnet. If this corrects the problem, check your router
configuration. If it does not, contact your network
service provider.
Enter the correct user name and password.
Note: The user name is admin, and the default
password is the unit's serial number.
Only five system managers are allowed at any one
time. To log everyone out, restart your system.