Setting Date, Time, And Location - Polycom VSX 3000 Administrator's Manual

Setting Date, Time, and Location

Setting Description
Allow Directory Specifies whether users can save changes they make to the
Changes directory.
Confirm Directory Specifies whether users are prompted to confirm new
Additions directory entries when saving the information for the last site
called.
Confirm Directory Specifies whether users are prompted to confirm deletions
Deletions of directory entries.
You can update the system with regional settings, including the
location-specific language and calling parameters.
To set the date, time, and location:
1. Go to System > Admin Settings > General Settings > Location.
2. Configure these settings:
Setting Description
Country Specifies the country where the system is located.
Changing the country automatically adjusts the country code
associated with your system number.
Language Sets the language for the user interface.
Country Code Specifies the country code for the system location.
Area Code Specifies if an area code is required to place ISDN calls in
Required the specified country.
ISDN International Specifies the international code required for placing ISDN
Access calls from the system location to another country.
Room Telephone Indicates the telephone number of the room where the
Number system is located.
Customizing the VSX System
4 - 39