Configuring The Global Directory; Configuring The Directory Server Settings - Polycom VSX 3000 Administrator's Manual

Configuring the Global Directory

Configuring the Directory Server Settings

If your organization uses the Polycom Global Management System™, you can
configure your system to use the Global Directory. The Global Directory
provides a list of other systems that are registered with the Global Directory
Server and available for calls. The other systems appear in the Directory,
allowing users to place calls to other users by selecting their names.
To configure the Directory Server settings:
1. Go to System > Admin Settings > Global Services > Directory Servers.
2. Configure these settings:
Setting Description
Global Directory Specifies the IP address or DNS address of the Global
(GDS) Directory Server. You can enter up to five addresses.
Password Lets you enter the Global Directory password, if there is one.
Register Registers this system with the Global Directory Server.
Display Global Displays other registered systems in the Global Directory.
Addresses
Display Name in Specifies whether to display the system's name in the Global
Global Directory Directories of other registered systems.
Save Global Copies the Global Directory to this local system.
Directory to
System
Group Name Specifies the group name used for Global Directory entries in
the local Directory.
Configuring Network Use
3 - 25