Configuring Call Preferences
To configure the analog phone line (POTS line) for the VSX 7000e or VSX 8000
system:
Go to this screen:
Telephony
System > Admin Settings >
Network > Telephony
Call Preference
System > Admin Settings >
Network > Call Preference
Network Dialing
System > Admin Settings >
Network > Call Preference >
Next
Call preferences help you manage the network bandwidth used for calls. You
can specify the default and optional call settings for outgoing calls. You can
also limit the call speeds of incoming calls.
To choose call preferences:
1. Go to System > Admin Settings > Network > Call Preference.
2. Configure these settings:
Setting
Description
Enable H.239
Specifies standards-based People+Content data collaboration.
Enable IP H.323
Allows the system to make IP calls.
Enable SIP
Allows the system to use SIP when connecting IP calls.
Enable ISDN
Allows the system to make ISDN calls.
H.320
This selection is only available when the system has ISDN
VSX 3000
networking capability.
VSX 7000
VSX 7000s
VSX 7000e
VSX 8000
Enable Voice
Allows the system to make voice-only calls to phones
Over ISDN
connected to an ISDN network, such as an organization's
PBX.
Configure these settings:
Enter the System Telephone Number for the
analog phone line.
Enable Analog Phone.
Add Analog Phone to the Dialing Order
Configuring Network Use
3 - 23