Units Of Measure; Pinning - Standard Horizon HX870 Owner's Manual

16.8 UNITS OF MEASURE

This section allows you to set the speed, distance and altitude units.
1. Press the MENU key to display "MENU".
2. Select "SETUP" with the CH▼/CH▲/◄/►
key, then press the [SELECT] soft key.
3. Select "GPS SETUP" with the CH▼/CH▲ key,
then press the [SELECT] soft key.
4. Select "UNITS OF MEASURE" with the CH▼/
CH▲ key, then press the [SELECT] soft key.
5. Press the CH▼/CH▲ key to select the item
you want to set.
6. Press the [SELECT] soft key.
7. Press the CH▼/CH▲ key to select the unit.
8. Press the [ENTER] soft key to store the new
setting.
9. Press the CLR key to return to radio operation.

16.9 PINNING

This selection is used to enable or disable position updates when the vessel
is not underway. The default setting is "OFF".
1. Press the MENU key to display "MENU".
2. Select "SETUP" with the CH▼/CH▲/◄/►
key, then press the [SELECT] soft key.
3. Select "GPS SETUP" with the CH▼/CH▲ key,
then press the [SELECT] soft key.
4. Select "PINNING" with the CH▼/CH▲ key,
then press the [SELECT] soft key.
5. Press the CH▼/CH▲ key to select "ON" or
"OFF".
When pinning is turned on, the HX870
ON:
will not update its position unless the
vessel travels over 10Ft.
OFF: When the vessel is underway or stopped, the HX870 continuously
updates its position. This improves accuracy of the position fix.
6. Press the [ENTER] soft key to save the new setting.
7. Press the CLR key to return to radio operation.
Page 116
DSC SETUP
GM SETUP
WAYPOINT SETUP
CH SETUP
GPS SETUP
GPS SETUP
POWER SAVE
ATIS SETUP
DIRECTION
LOCATION FORMAT
BACK
TIME OFFSET
TIME AREA
TIME FORMAT
UNITS OF MEASURE
UNITS OF MEASURE
SPEED
BACK SELECT
DISTANCE
ALTITUDE
BACK
DSC SETUP
GM SETUP
WAYPOINT SETUP
CH SETUP
GPS SETUP
GPS SETUP
UNITS OF MEASURE
ATIS SETUP
PINNING
ON
POSITION INPUT
BACK
D-GPS
ON
OUTPUT SENTENCES
LOGGER INTERVAL
LOG ERASE
BACK SELECT
BACK
SETUP
SELECT
GPS SETUP
kts
nm
ft
SELECT
SETUP
SELECT
GPS SETUP
PINNING
OFF
ON
ENTER
HX870