Coordinate System; Pinning - Standard Horizon HX851E Owner's Manual

10.3 COORDINATE SYSTEM

This selection selects the Coordinate System to be shown on the HX851E
display. The default setting is "ddd mm.mmm".
1. Press and hold the [ CALL ( ENT ) MENU ] key un-
til "Setup Menu" appears.
2. Press the [ ] key to select "GPS Setup" menu.
3. Press the [ CALL ( ENT ) MENU ] key, then select
"Coordinate System" in the "GPS Setup" menu with the
[ ] / [ ] key.
4. Press the [ CALL ( ENT ) MENU ] key.
5. Press the [ ] / [ ] key to select the desired Co-
ordinate System. The Coordinate System can
be select to "ddd mm ss", "ddd mm.mm", or "ddd
mm.mmm".
6. Press the [ CALL ( ENT ) MENU ] key to store the selected
system.
7. To exit this menu and return to radio operation mode press the [ 16/9 ] key
or press the [ CLR )] key several times.

10.4 PINNING

This selection selects whether the updating of your current position enables or
disables when your vessel stops. The default setting is "On".
1. Press and hold the [ CALL ( ENT ) MENU ] key un-
til "Setup Menu" appears.
2. Press the [ ] key to select "GPS Setup" menu.
3. Press the [ CALL ( ENT ) MENU ] key, then select
"Pinning" in the "GPS Setup" menu with the [ ] / [
key.
4. Press the [ CALL ( ENT ) MENU ] key.
5. Press the [ ] / [ ] key to select "On" or "Off".
6. Press the [ CALL ( ENT ) MENU ] key to store the
selected setting.
7. To exit this menu and return to radio operation mode
press the [ 16/9 ] key or press the [ CLR ] key several
times.
Page 70
]
HX851E