Establishing An Activesync Connection; Using The Stb2000 Cradle And Usb Cable; Using Only A Usb Cable - Motorola MT2070 User Manual

G - 2 MT2070/MT2090 User Guide

Establishing an ActiveSync Connection

The MT2000 runs the CE.NET 5.0 Core OS which is supported by ActiveSync v4.5 for Windows XP and
Windows Mobile Center for Window 7 and Vista. An ActiveSync connection on the MT2000 can be set up with
the STB2000 cradle. The STB2000 cradle is an ActiveSync and charge only cradle and cannot be used to
communicate via Bluetooth.
If an STB2000 cradle is unavailable, a USB cable (p/n CBAU01-S07ZAR) can be connected directly into the
MT2000.
NOTE If connecting ActiveSync via USB, it is recommended you use an ESD dongle with the USB cable. (ESD
part numbers KT-8830-03R -3 piece kit, or KT-8830-10R - 10 piece kit.)

Using the STB2000 Cradle and USB Cable

Ensure ActiveSync v4.5 or Windows Mobile Center is installed on the PC.
1.
Visit http://www.microsoft.com
Connect the USB cable to the STB2000 cradle and to the PC.
2.
Place the MT2000 into the STB2000 cradle. ActiveSync should autodetect and make the connection.
3.
To view the files loaded on the device, click Explore in the ActiveSync window.
4.

Using Only a USB Cable

NOTE Prior to connecting a USB cable to the device, ensure an appropriate tool is available to remove the cable
connected to the device.
Connect the USB cable to the bottom of the MT2000 and to the PC. Ensure a U displays in the upper right
1.
corner of the MT2000 screen. This indicates the cable connection was detected.
From the MT2000 Home menu click Config > Config USB. Scroll to ActiveSync and click Enter. Click
2.
Close.
ActiveSync should autodetect and make the connection.
3.
To view the files loaded on the device click Explore in the ActiveSync window.
4.
for ActiveSync downloads.