Serial Port Services; Activesync Using Serial Port Services - Motorola MC55 User Manual

3 - 16 MC55 User Guide
Ensure that the Headset profile is enabled on the MC55. See
2.
Use the Connection Wizard to search for a Bluetooth headset.
3.
Select the device and tap Next.
4.
Select the Headset service name and select Connect. The MC55 connects to the headset. Refer to the
5.
headset user manual for instructions on communicating with a Bluetooth device.
NOTE When using a Bluetooth headset with Headset Services, you cannot accept or end a call from the headset.
You must accept or end a call on the MC55.
Press the communication button on the headset. This routes both system and WAN call audio to the headset.
6.
When a call is received on the MC55, tap the Accept button to answer the call.
7.
Press the communication button on the headset to route the audio back to the MC55.
8.

Serial Port Services

Use the wireless Bluetooth serial port connection as you would a physical serial cable connection. Configure the
application that will use the connection to the correct serial port.
To establish a serial port connection:
Ensure the MC55 is discoverable and connectable. See
1.
Use the Connection Wizard to search for a Bluetooth serial device.
2.
Select the device and tap Next. The Connection Favorite Options window appears.
3.
In the Local COM Port: drop-down list select a COM port.
4.
Tap Finish.
5.

ActiveSync Using Serial Port Services

NOTE By default, COM ports COM5, COM9, COM11, COM21, COM22 and COM23 are Bluetooth virtual ports. If an
application opens one of these ports, the Bluetooth driver activates and guides you through a Bluetooth
connection.
Use the wireless Bluetooth serial port connection for ActiveSync just as you would a physical serial cable
connection. You must configure the application that will use the connection to the correct serial port.
Profiles Tab on page 3-28
Device Info Tab on page 3-20.
for more information.