Connecting An Rs-232 Interface - Motorola MT2070 User Manual

8 - 2 MT2070/MT2090 User Guide

Connecting an RS-232 Interface

Connect the device directly to the host computer.
RS-232 Direct Connection
Figure 8-1
NOTE Interface cables vary depending on configuration. The connectors illustrated in
only. The connectors may be different than those illustrated, but the steps to connect the device are the
same.
NOTE Connect a power supply to the cradle (not shown) for fast charging.
Attach the modular connector of the RS-232 interface cable to the cable interface port on the device.
1.
Connect the other end of the RS-232 interface cable to the serial port on the host.
2.
Connect the power supply to the serial connector end of the RS-232 interface cable. Plug the power supply
3.
into an appropriate outlet.
Select the RS-232 host type by scanning the appropriate bar code from
4.
To modify any other parameter options, scan the appropriate bar codes in this chapter.
5.
OR
Serial Port
Connector to Host
Interface Cable
Power Supply Cable
Figure 8-1
RS-232 Host Types on page
are examples
8-6.