Upc/Ean/Jan Supplemental Aim Id Format; Transmit Upc-A Check Digit - Motorola MT2070 User Manual

12 - 14 MT2070/MT2090 User Guide

UPC/EAN/JAN Supplemental AIM ID Format

Parameter # F1h A0h
Select an output format when reporting UPC/EAN/JAN bar codes with supplementals with AIM ID enabled:
•
Separate - UPC/EAN with supplementals transmit as ]E<0 or 4><data>]E<1 or 2>[supp data]
•
Combined - EAN-8 with supplementals transmit as ]E4<data>]E<1 or 2>[supp data]
All other UPC/EAN with supplementals transmit as ]E3<data+supps>

Transmit UPC-A Check Digit

Parameter # 28h
The check digit is the last character of the symbol used to verify the integrity of the data. Scan the appropriate bar
code below to transmit the bar code data with or without the UPC-A check digit. It is always verified to guarantee
the integrity of the data.
*
Transmit UPC-A Check Digit
Separate
(00h)
(01h)
*
Combined
(01h)
Do Not Transmit UPC-A Check Digit
(00h)