Ucc Coupon Extended Code; Coupon Report - Motorola MT2070 User Manual

12 - 22 MT2070/MT2090 User Guide

UCC Coupon Extended Code

Parameter # 55h
Enable this parameter to decode UPC-A bar codes starting with digit '5', EAN-13 bar codes starting with digit '99',
and UPC-A/GS1-128 Coupon Codes. UPCA, EAN-13, and GS1-128 must be enabled to scan all types of
Coupon Codes.
*
Enable UCC Coupon Extended Code
NOTE See
GS1-128 (right half) of a coupon code.

Coupon Report

Parameter # F1h DAh
Traditional coupon symbols (old coupon symbols) are composed of two bar codes: UPC/EAN and Code128. A new
coupon symbol is composed of a single Databar Expanded bar code. The new coupon format offers more options
for purchase values (up to $999.99) and supports complex discount offers such as a second purchase
requirement.
An interim coupon symbol also exists that contains both types of bar codes: UPC/EAN and Databar Expanded.
This format accommodates both retailers that do not recognize or use the additional information included in the
new coupon symbol, as well as those who can process new coupon symbols.
Scan a bar code below to select one of the following options for decoding coupon symbols:
•
Old Coupon Symbols
coupon symbol reports UPC, and scanning a new coupon symbol reports nothing (no decode).
•
New Coupon Symbols
interim coupon symbol or a new coupon symbol reports Databar Expanded.
(01h)
UPC/EAN/JAN Supplemental Redundancy on page 12-13
- Scanning an old coupon symbol reports both UPC and Code 128, scanning an interim
- Scanning an old coupon symbol reports either UPC or Code 128, and scanning an
Disable UCC Coupon Extended Code
(00h)
to control autodiscrimination of the