Remove Bluetooth Connection; Restore Lost Bluetooth Connection - Motorola RS507 Quick Reference Manual

12
Bluetooth Connection
Establish Bluetooth Connection
To establish Bluetooth connection with a mobile computer:
Ensure that the Imager is within a range of 10 meters (30 feet) from the mobile
1.
computer.
Install the battery in the Imager.
2.
Launch the Bluetooth Device (BD) Address application on the mobile
3.
computer. Most BD Address applications display a pairing bar code image on
the screen of the mobile computer.
Scan a pairing barcode from the mobile computer screen or a provided label.
4.
The Imager emits one string of high/low/high/low beeps.
The Scan LED starts flashing green indicating that the Imager is attempting to
5.
establish connection with a mobile computer.
When connection is established, the Scan LED turns off and the Imager emits
6.
one string of low/high beeps. The Imager is connected and ready for scanning.
NOTE When replacing the Imager battery, the Imager memory retains the pairing
information of the last paired mobile computer.

Remove Bluetooth Connection

NOTE Removing Bluetooth connection is only required if the Imager is configured
for auto-connect on power on and has to be paired with a different
terminal.
Scan an unpairing bar code label for disconnecting the Imager from the mobile
1.
computer.
The Imager emits one string of high/low beeps indicating that Bluetooth
2.
communication with the mobile computer is disconnected.

Restore Lost Bluetooth Connection

The Imager maintains Bluetooth communication with a mobile computer within a
range of 10 meters (30 feet). When the Imager fails to establish connection or
connection is lost during operation, the Imager emits one string of low/high beeps.
To reestablish the Bluetooth connection with a mobile computer:
Ensure that the Imager is within a range of 10 meters (30 feet) from the mobile
1.
computer.
RS507 Hands-Free Imager