Motorola MT2070 User Manual page 125

Regulatory Options
Use the Regulatory settings to configure the country the device is in. Due to regulatory requirements (within a
country) a device is only allowed to use certain channels.
Regulatory Options Dialog Box
Figure 2-99
Regulatory Options
Table 2-20
Field
Settings Select a country from the drop-down list. If the Enable 802.11d check box is not selected, a
profile's country selection must match this setting in order to connect to that profile.
Enable 802.11d If the Enable 802.11d check box is selected, the WLAN adapter follows the 802.11d standard. It
passively scans until valid country information is received from an AP. It limits transmit power
settings based on maximums received from the AP.
Profiles which use Infrastructure mode can only connect if the country selected in the profile
matches the AP country setting or if the profile country setting is Allow Any Country. Profiles
which use Ad-hoc mode are not 802.11d compliant.
Band Selection
The Band Selection settings identify the frequency bands to scan when finding WLANs. These values refer to the
802.11 standard networks.
Band Selection Dialog Box
Figure 2-100
NOTE Select one band for faster access when scanning for WLANs.
Not all devices support both 2.4 GHz and 5 GHz bands.
Operating the MT2070/MT2090 2 - 77
Description