Scan Inventory; Location - Motorola MT2070 User Manual

2 - 20 MT2070/MT2090 User Guide

Scan Inventory

The Scan Inventory screen allows the user to enter inventory information and send it to a local file in the Windows
CE file system. Set the file type in which to save the inventory data in Menu > Options screen > Format: (see
Figure 2-16 on page
To access Scan Inventory, start at the Home screen, scroll to Scan Inventory and press ENT.
Scan Inventory Screen - Default View
Figure 2-14
When the Scan Inventory screen displays for the first time, the cursor defaults to the Quantity field. If a quantity is
required, it must be entered prior to scanning or entering data in the Item: field. Use the Up or Down Scroll key to
move from one field to another. Enter data as necessary.

Location

Use the keypad to enter a location. Location is an eight character alphanumeric field. Press the orange key to
enable the alpha keypad; press the orange key again to enable the numeric keypad. When the alpha keypad is
enabled and orange circle appears on the bottom of the screen.
Scan Inventory Screen - Location
Figure 2-15
The device remembers the location entered throughout the session, until it is changed and stores as the default
location in location.xml.
2-21).