Pairing - Motorola MT2070 User Manual

4 - 20 MT2070/MT2090 User Guide
multipoint-to-point mode, the cradle forwards parameter settings to all connected scanners, each scanner decides
to store the parameter or not based on the parameter broadcast setting.
*Enable Parameter Broadcast

Pairing

Pairing is the process by which a device initiates communication with a cradle. Scanning Multipoint-to-Point
activates multi device-to-cradle operation and allows up to seven devices to pair to one cradle. The cradle includes
a pairing bar code.
To pair the device with the cradle, scan the pairing bar code on the cradle. A high/low/high/low beep sequence
indicates that the pairing bar code was decoded. When a connection between the cradle and device is established,
a low/high beep sounds.
NOTE 1. The pairing bar code that connects the device to a cradle is unique to each cradle.
2. Do not scan data or parameters until pairing completes.
3. When the device is paired to the cradle in SPP Master or Cradle Host mode, the device automatically
tries to reconnect to a remote device when a disconnection occurs that is due to the radio losing
communication. For more information see
Disable Parameter Broadcast
Auto-reconnect Feature on page 4-14.