Waking the MT20X0
The wakeup conditions define what actions wake up the device. These settings are configurable and the factory
default settings shown in
Wakeup Conditions (Default Settings)
Table 2-30
Status
Suspend
Auto Off
File System Directory Structure
The device directory structure displays all of the file folders. The pre-installed folders are in flash file system
memory.
Directory Structure
Figure 2-142
•
Application and Platform folders are located in flash file system memory.
•
The Windows, Program Files, profiles and My Documents folders are composite, RAM-based folders
generated from ROM (many of these files are marked read only).
•
The Network folder is a link to file systems mapped using the network redirector. The files do not physically
reside on the device.
•
The Temp and Recycled folders typically contain RAM based files.
NOTE All files copied to the RAM-based folders are lost after a cold boot.
Table 2-30
are subject to change/update.
Description
When the device is set to the suspend
mode these actions wake the device.
When the automatic power-off function
places the device in suspend mode these
actions wake the device.
Operating the MT2070/MT2090 2 - 107
Conditions for Wakeup
AC power is added or removed.
Cradle/cable connect or disconnect.
Key or scan trigger press.
Real Time Clock set to wake up.
AC power added or removed.
Cradle/cable connect or disconnect.
Key or scan trigger press.
Real Time Clock set to wake up.