Rts Line State; Beep On <Bel - Motorola MT2070 User Manual

8 - 16 MT2070/MT2090 User Guide

RTS Line State

This parameter sets the idle state of the Serial Host RTS line. Scan a bar code below to select Low RTS or High
RTS line state.
*
Host: Low RTS
Beep on <BEL>
If you enable this parameter, the device issues a beep when it detects a <BEL> character on the RS-232 serial line.
<BEL> indicates an illegal entry or other important event.
Beep On <BEL> Character
(Enable)
Host: High RTS
*
Do Not Beep On <BEL> Character
(Disable)