Password - Motorola MT2070 User Manual

2 - 56 MT2070/MT2090 User Guide
dialog, it is cached as usual, but it is not be used to initialize the username field the next time the interactive
credential dialog is shown for that profile; the username field is initialized to blank. In summary, the user can control
whether the username field in the interactive credential dialog is initialized, either with the last-interactively-entered
username for that profile or with the username entered into the profile, by whether any value is entered in the Enter
User Name field during profile entry.
Username Dialog Box
Figure 2-66

Password

Use the Password dialog to enter a password. If EAP/TLS is the selected authentication type, the password dialog
does not display. Note that if a username was entered and no password is entered, Fusion assumes that no
password is a valid password.
Password Dialog Box
Figure 2-67
Enter a password in the Enter Password field. If an authentication tunnel type of EAP-GTC is used, a
1.
Password dialog with additional radio buttons displays.
EAP-GTC Password Dialog Box
Figure 2-68