Bluetooth Friendly Name; Discoverable Mode - Motorola MT2070 User Manual

Bluetooth Friendly Name

You can set a meaningful name for the device that appears in the application during device discovery. The default
name is the device name followed by its serial number, e.g.,
Defaults reverts the device to this name; use custom defaults to maintain the user-programmed name through a
Set Defaults operation.
To set a new Bluetooth Friendly Name, scan the following bar code, then scan up to 23 characters from
E, Alphanumeric Bar Codes. If the name contains less than 23 characters, scan
entering the name.
NOTE If your application allows you to set a device name, this takes precedence over the Bluetooth Friendly
Name.
Bluetooth Friendly Name

Discoverable Mode

Select a discoverable mode based on the device initiating discovery:
•
Select General Discoverable Mode when initiating connection from a PC.
•
Select Limited Discoverable Mode when initiating connection from a mobile device (e.g., Motorola Q), and
the device does not appear in General Discoverable Mode. Note that it can take longer to discover the device
in this mode.
The device remains in Limited Discoverable Mode for 30 seconds, and green LEDs flash while in this mode.
It is then non-discoverable. To re-active Limited Discoverable Mode, press the trigger.
Limited Discoverable Mode
Radio Communications
MT2070/MT2090 123456789ABCDEF
End of Message on page E-7
*
General Discoverable Mode
4 - 7
. Scanning Set
Appendix
after