Nixdorf Beep/Led Options; Ignore Unknown Characters - Motorola MT2070 User Manual

8 - 18 MT2070/MT2090 User Guide

Nixdorf Beep/LED Options

If you selected Nixdorf Mode B, this indicates when the device beeps and turns on its LED after a decode.
*
Normal Operation
(Beep/LED immediately after decode)
Beep/LED After CTS Pulse

Ignore Unknown Characters

Unknown characters are characters the host does not recognize. Select Send Bar Codes with Unknown
Characters to send all bar code data except for unknown characters. The device issues no error beeps.
Select Do Not Send Bar Codes With Unknown Characters to send bar code data up to the first unknown
character. The device issues an error beep.
*
Send Bar Code
(with unknown characters)
Beep/LED After Transmission
Do Not Send Bar Codes
(with unknown characters)