Communication; Sending Data To The Host Computer - Motorola MT2070 User Manual

13 - 4 MT2070/MT2090 User Guide
Connect the interface cable to the new host, or the new interface cable to the existing host.
3.
Reconnect the power supply, if required.
4.
If necessary, scan the appropriate host bar code (for non-autodetected interfaces).
5.
CAUTION If the device does not recognize the host, disconnect the power supply, then reconnect after
connecting the host cable.

Communication

Sending Data to the Host Computer

The STB2078-C10007WR single slot multi-interface Bluetooth cradle receives data from the device via a wireless
radio connection and transmits it to the host computer via the host cable. The device and cradle must be paired for
successful wireless communication. For detailed information about pairing, radio communications, Bluetooth
technology and lost connections to the host computer, refer to the MT2070/MT2090 Integrator Guide (part number
72E-117858-xx).
NOTE ActiveSync is not supported on this cradle.