User Settings
On this screen, make adjustments for the device's beeper, backlight and time. Press the Up or Down Scroll key to
select an option.
User Settings Screen
Figure 2-4
•
Beeper Volume: Scroll to Beeper Volume and press the right or left Scroll key to choose a Low, Medium or
High beeper volume. Press the right soft key (Done) to save changes and end the session.
•
Beeper Frequency: Scroll to Beeper Frequency and press the right or left Scroll key to choose a Low,
Medium or High beeper frequency. Press the right soft key (Done) to save changes and end the session.
•
Backlight: Scroll to Backlight and press ENT to display the Backlight screen.
Backlight Screen
Figure 2-5
Scroll to the appropriate line.
•
Brightness: Use the right or left Scroll key to choose a brightness level for the display.
•
Battery Timeout: Using the keypad, enter a numeric value to set the seconds in which the backlight turns off
when the device is exclusively using battery power.
•
AC Timeout: Using the keypad, enter a numeric value to set the seconds in which the backlight turns off
when the device is not powered exclusively by battery power.
•
Press the right soft key (Done) to save changes and end the session.
Operating the MT2070/MT2090 2 - 13