Transmitting A Position Request To Another Vessel - Standard Horizon MATRIX GX3000S Owner's Manual

The GX3000S has the capability to turn off the Position Request ringer.
1. Press and hold down the [ CALL ( MENU )] key until
"Radio Setup Radio Setup" menu appears.
Radio Setup Radio Setup
Radio Setup
2. Turn the CHANNEL selector knob to select "DSC
Setup" menu.
Setup Setup
Setup Setup
3. Press the [ ENT ] key, then select "DSC Beep
CHANNEL selector knob.
4. Press the [ ENT ] key.
5. Turn the CHANNEL selector knob to select "POS
Request Request Request." Request Request
6. Turn the CHANNEL selector knob to select "Off
7. Press the [ ENT ] key to store the selected setting.
8. To exit this menu and return to radio operation mode
press the [ 16/9 ] key.
If you wish to return to enabling the ringer tone, just re-
peat the above procedure, turning the CHANNEL se-
lector knob to select "On

11.8.2 Transmitting a Position Request to Another Vessel

Pre-Programmable Request
1. Press the [ CALL ( MENU )] key. The "
menu will appear in the display.
2. Turn the CHANNEL selector knob to select "
Request Request ."
Request Request Request
3. Press [ ENT ] key to show the Position request direc-
tory. This directory uses the INDIVIDUAL Directory
information.
4. Turn the CHANNEL selector knob to select a name,
then press the [ ENT ] key.
5. Press the [ ENT ] key to transmit the position request
DSC call.
6. When the GX3000S receives the position from the
polled vessel it is shown on the radio display and
also transferred to the GPS Chart plotter.
7. If the GX3000S does not receive a reply, the display
will be as shown in the illustration on the right. To
send again, press the [ ENT ] key.
GX3000S
DSC Beep" with the
DSC Beep DSC Beep
DSC Beep
On" in step "6" above.
On On On
DSC DSC
DSC DSC
POS POS POS
POS
Off Off
Off." Off
DSC Operation DSC Operation "
DSC Operation DSC Operation DSC Operation
POS POS POS
POS POS
Page 53