Transmitting A Position Request To Another Vessel - Standard Horizon ECLIPSE DSC+ GX1200E Owner's Manual

9.7.2 Transmitting a Position Request to Another Vessel

Position Request from Individual / Position Call Directory
1. Press the
appear in the display.
2. Press the
REQUEST ".
3. Press the
position request directory. The previous
four position request contacts will be
listed.
4. Press the
name, then press the
Press the
name other than those on the display.
This directory uses the individual direc-
tory information.
5. Press the
category (" ROUTINE " or " SAFETY ") for
the position request call, then press the
soft key.
" SAFETY " is normally used as the category for position request calls.
However, " ROUTINE " should be selected when calling a vessel with
radios of certain legacy models that cannot accept position request
calls categorized as " SAFETY ".
Page 56
key. The " DSC MENU " will
keys to select " POS
/
soft key to show the
/ keys to select a
soft key.
soft key to select a
/ keys to select the
-DSC MENU-
INDIVIDUAL
GROUP
ALL SHIPS
-POS REQUEST-
YAESU
STANDARD
234567891
ROUTINE
SAFETY
NOTE
-DSC MENU-
GROUP
ALL SHIPS
POS REQUEST
-POS REQUEST-
MANUAL
YAESU
STANDARD
-CATEGORY-
GX1200E