Additional Authorization List (Aal) - Icom IC-M71 Instruction Manual

CONTAINERIZED KITCHEN (CK)

ADDITIONAL AUTHORIZATION LIST (AAL)

INTRODUCTION
Scope
This work package lists additional items you are authorized for the support of the CK.
Explanation of Columns in the AAL
Column (1) – National Stock Number (NSN). Identifies the stock number of the item to be used
for requisitioning purposes.
Column (2) - Description, Commercial and Government Entity Code (CAGEC), and Part
Number (P/N). Identifies the Federal item name (in all capital letters) followed by a minimum
description when needed. The stowage location of COEI and BII is also included in this column.
The last line below the description is the CAGEC (in parentheses) and the part number.
Column (3) - Usable On Code. When applicable, gives you a code if the item you need is not
the same for different models of equipment.
Column (4) - Unit of Measure (U/M). Indicates the physical measurement or count of the item
as issued per the National Stock Number (NSN) shown in column (1).
Column (5) – Qty Recm. Indicates the quantity recommended.
ADDITIONAL AUTHORIZATION LIST ITEMS
(1)
NATIONAL STOCK
NUMBER
7310-01-458-5060 EXTENSION CORD, 110 VAC, 25 FT (3AD06) MS0425
5120-01-013-1676 SLIDE HAMMER, GROUND ROD (97403) 13226E7741
TM 10-7360-226-13&P
Table 1. Additional Authorization List.
(2)
DESCRIPTION, (CAGEC) AND PART NUMBER
0050 00-1/2 Blank
0050 00
(3) (4) (5)
USABLE U/M QTY
ON CODE RECM
EA 2
EA 1