Troubleshooting Procedures - Modern Burner Unit (Mbu) - Icom IC-M71 Instruction Manual

CONTAINERIZED KITCHEN (CK)
TROUBLESHOOTING PROCEDURES (MODERN BURNER UNIT)
THIS WORK PACKAGE COVERS:
Modern Burner Unit (MBU)
INITIAL SETUP:
CK set up
Maintenance Level
Operator/Crew
MODERN BURNER UNIT (MBU) MALFUNCTIONS
Malfunction
MBU does not power up
MBU powers on but does
not start
TM 10-7360-226-13&P
Table 1. Troubleshooting Procedures (MBU)
Test or Inspection
No power to any MBUs
Power available to all but one MBU
Check low fuel light on MBU
0011 00-1
Corrective Action
Ensure MBU Power switch (next
to spice rack) is ON
Ensure MBU converter is ON
(front wall inside mechanical
room)
Ensure MBU converter is plugged
in (mechanical room)
Ensure 24 VDC is properly
connected from the converter to
the MBUs
Notify unit maintenance
Ensure power cable to affected
MBU is properly connected
Swap MBU with another unit to
determine if the problem is in the
MBU or power cable
Refer to TM 10-7310-281-13&P
for additional troubleshooting
guidance for the MBU
Notify unit maintenance
Refuel MBU
0011 00