Components Of End Item (Coei) And Basic Issue Items (Bii) Lists - Icom IC-M71 Instruction Manual

TM 10-7360-226-13&P
CONTAINERIZED KITCHEN (CK) 0049 00

COMPONENTS OF END ITEM (COEI) AND BASIC ISSUE ITEMS (BII) LISTS

INTRODUCTION
Scope
This work package lists the Components of End Item (COEI) and Basic Issue Items (BII) for the
CK to help you inventory items for safe and efficient operation of the equipment.
General
The COEI and BII information is divided into the following lists:
Components of End Item (COEI). This list is for information purposes only and is not authority
to requisition replacements. These items are part of the CK. As part of the end item, these
items must be with the end item whenever it is issued or transferred between property accounts.
Items of COEI are removed and separately packaged for transportation or shipment only when
necessary. Illustrations are furnished to help you find and identify the items.
Basic Issue Items (BII). These essential items are required to place the CK in operation,
operate it, and to do emergency repairs. Although shipped separately packaged, BII must be
with the CK during operation and when it is transferred between property accounts. Listing
these items is your authority to request/requisition them for replacement based on authorization
of the end item by the TOE/MTOE. Illustrations are furnished to help you find and identify the
items.
Explanation of Columns in the COEI List and BII List
Column (1) – Illus Number. Gives you the number of the item illustrated.
Column (2) – National Stock Number (NSN). Identifies the stock number of the item to be used
for requisitioning purposes.
Column (3) – Description, Commercial and Government Entity Code (CAGEC), and Part
Number (P/N). Identifies the Federal item name (in all capital letters) followed by a minimum
description when needed. The stowage location of COEI and BII is also included in this column.
The last line below the description is the CAGEC (in parentheses) and the part number.
Column (4) – Usable On Code. When applicable, gives you a code if the item you need is not
the same for different models of equipment.
Column (5) – Unit of Measure (U/M). Indicates the physical measurement or count of the item
as issued per the National Stock Number (NSN) shown in column (2).
Column (6) – Qty Rqr. Indicates the quantity required.
0049 00-1